Custom Cover Glass
Custom cover glass is the outer glass layer that protects a display, touch screen, light or control panel and carries its printed design. We cut, CNC machine, strengthen, print and coat cover glass from 0.33 to 12 mm in soda lime, aluminosilicate, Gorilla®, Dragontrail™ and Panda glass to your drawing, from single prototypes to production runs.
Capabilities
Glass
Soda lime, aluminosilicate · Gorilla®, Dragontrail™, Panda
Thickness and shape
0.33–12 mm · 2.5D, stepped and curved
Strengthening
Chemical, KNO₃ at 400 °C · Thermal, from 3 mm
Machining
CNC holes, slots and steps · Ground to thickness and flatness
Printing
Silkscreen, dead front · IR-transparent and UV-resistant ink
Surface
AG, AR, AF · Antimicrobial
Gallery
Get a cover glass quote
Send your drawing with glass type, thickness, holes, printing and surface treatments, and where the product is used, and we will confirm the material and process route.
Choose the Glass and Strengthening
The glass and how it is strengthened decide how well a cover survives scratches, drops and impact.
| Glass | Strengthening | Surface compression and depth | Pencil hardness | Choose it for |
|---|---|---|---|---|
| Soda lime | Chemical, ion exchange | Over 450 MPa, over 8 µm deep | 7H | Indoor covers with light handling, lowest cost |
| Aluminosilicate: Gorilla®, Dragontrail™, Panda | Chemical, ion exchange | Over 650 MPa, 35–40 µm deep | 9H | Thin touch covers handled every day |
| Soda lime or ultra-clear | Thermal tempering, 3 mm and up | Over 69 MPa (10,000 psi), deep compression zone | — | Thick panels, lighting and outdoor impact |
Chemical strengthening puts very high compression into a thin surface layer. On soda lime that layer is only about 8 µm deep, so a scratch deeper than that cancels most of the gain; aluminosilicate carries a layer four to five times deeper. Thermal tempering gives far lower surface stress, but its compression zone reaches roughly a fifth of the thickness, which is why thick outdoor and lighting panels are thermally tempered.
Cover Glass by Application
Each type of cover has its own page with specifications and examples.
Display and Touch Screen Covers
Front glass for LCD, OLED and signage displays, and the outer layer of capacitive touch screens.
- Thin chemically strengthened glass
- Optical bonding ready [Display cover glass →] [Touch screen cover glass →]
2.5D and Curved Glass
Flat panels with ground arc edges, or panels bent across their whole face.
- 2.5D from 0.5 mm
- Bends up to 160° [2.5D cover glass →] [Curved glass →]
Dead Front Panels
Printed covers that look solid until the display or icons behind them light up.
- Hidden-until-lit printing
- For access control and smart home [Dead front glass →]
Impact-Rated Covers
Thick tempered glass for outdoor and public devices.
- IK07 to IK10
- 3–8 mm [IK10 glass →]
Camera and Sensor Windows
Small AR-coated windows for cameras, IR sensors and LiDAR.
- Up to 98% transmission
- IR-transparent printing [Camera and sensor glass →]
Surface Treatments
Anti-glare, anti-reflective, anti-fingerprint and antimicrobial finishes.
- AG, AR, AF
- Antimicrobial for medical use [AG →] [AR →] [AF →] [Antimicrobial →]
How Cover Glass Is Made
Every step that shapes or cuts the glass comes before strengthening, printing comes before coating, and AF goes on last.
- 01
Cut
Raw sheet is cut slightly oversize, leaving stock for machining.
- 02
CNC machine
The outline, edges, holes, slots, steps and 2.5D arcs are machined.
- 03
Grind
Double-side grinding brings the panel to its final thickness and flatness. AG etching, if specified, is done at this stage.
- 04
Strengthen
Thin glass is ion exchanged in potassium nitrate at about 400 °C; glass from 3 mm up can be thermally tempered instead.
- 05
Print
Borders, logos, dead-front windows and IR zones are silkscreen printed and cured.
- 06
Coat
AR and AF are applied by evaporation or magnetron sputtering, AR first and AF on top.
- 07
Clean and inspect
Panels are ultrasonically cleaned and inspected before packing.



